There are quite a few people who are looking at various choices to light up their business. You can be a bar owner, night club, a bar band or also a music group, for all these people lighting plays a very key role in ensuring the success of their company or show.
There are a majority of factors for using a DMX lighting controller. It enables you to control the lighting and special effects operation. Your band may have some gig planned and you may require a stunning light show. Even so, you may not be prepared to spend substantial sums of money for buying the lights and special effects. Whatever be your requirements using a DMX controller will allow you to manage unique lighting appliances and special effects right from the PC or laptop.
DMX lighting was designed to simplify the process of lighting control. In fact it enables you to manage lighting fixtures made by diverse producers with the assist of a single controller. Much earlier than the digital control was produced, each element of lighting control needed dedicated wiring. This made troubleshooting a hard task.
In the preliminary stages each manufacturer used their own digital control systems. However, this forced the consumers to use only a particular brand of lighting fixture, leaving them with no choices. Afterwards arrived the DMX controller and really soon DMX became the standard for lighting control. For a lot of people, the DMX lighting controller was a blessing as it allowed them to use distinct manufacturers in a typical control wiring system.
The first issue that you need to do when setting up a DMX system is to connect the DMX lights and also the controller to the XLR cables. It does not matter in what order the lights are installed but what matters is that at the finish of the chain you need to have a termination switch set in the “ON” position. If at the end of the chain, the last fixture does not have a termination switch, it is possible to connect it to the DMX termination plug.
Next, go through every single lighting fixture’s documentation so that you should know how many channels it needs. If the lighting fixtures that you use are more advanced, you may require a lot more DMX channels to control.
Finally, not like earlier, there are other factors like dimmer, shutter, prism, gobo rotation speed and direction, lamp striking, gobo shaking, double color wheels, operation method selection or fixture resetting that the DMX controller must take care off.
