Scroll Top

Step-By-Step Installation Guide For High Power LED BMW Angel Eyes For BMW X5

Are you thinking about getting a pair of high power angel eye bulbs for sparking up your BMW? If this is the case, then this article might just prove to be of immense help to you. Owing to the simple plug and play functionality, installing these angel eye bulbs is extremely easy. You are not required to be a professional mechanic for mounting these LED bulbs onto your BMW. Just follow the simple instructions for installation and you can easily install the high power angel eye ring markers in your BMW. Read below to discover how!

  • Remove the ignition key, switch off the engine, and turn off all the lights of the vehicle.
  • Locate the position of the angel eye ring bulb in your BMW and open its cap. As you open the cap, the head of the H8 halogen bulbs will be visible. Hold onto the stock of the bulbs and take them out.
  • Get your stock of new LED halo ring marker bulbs and fold the two ends of the wiring by 60 degrees. With the two arms in a 60 degree position, install the LED bulb stock into the H8 housing of your bimmer.
  • Unplug the decoder from the stock harness. Once it is out, connect the error decoder with the newly installed LED halo ring marker bulbs. After making a proper connection, plug in the decoder back into the stock harness assembly.
  • For ensuring the maximum light performance, it is mandatory that the LED bulb is placed directly in front of the wide opening of the angel eye ring marker tube.
  • Once the decoder is placed in, test it for proper functioning. If the bulb and the decoder assembly are working fine, then close the cap of the ring tube.
  • However, in the case where the assembly isn’t working properly, then take off the decoder plug and re-install it into the stock harness.
  • Switch on the engine and all of the lights on the vehicle and witness your newly installed high power angel eye LED ring marker bulbs sparking up your now beautiful and attractive BMW.

Upgrading your BMW with these high power ring marker LED bulbs is extremely easy. By following the above listed instructions step by step, you can impart a whole new look to your conventional BMW within minutes. Moreover, professional expertise or technical skill is not demanded at all. Just follow this simple instructional guide for mounting on these LED ring markers.



AUTOPOST by BEDEWY VISIT GAHZLY

Related Posts

Privacy Preferences
When you visit our website, it may store information through your browser from specific services, usually in form of cookies. Here you can change your privacy preferences. Please note that blocking some types of cookies may impact your experience on our website and the services we offer.